Car Kits - iPhone

MAG AND WIRELESS CHARGING (OPTIONAL)

Upgrade your mount with one of our Quad Lock MAG™ Heads for an even easier way to secure your phone. Simply position your device and let the magnets do the rest, no twist required.

Opt for our Quad Lock MAG™ Wireless Charging Head or our twist, lock Quad Lock® Wireless Charging Head to keep your phone fully charged on every adventure.

Quad Lock MAG™ Heads require use of a Quad Lock MAG™ Case or MAG Universal Adaptor.

Please refer to the Vent Suitability Guide to check if your car vents are compatible with the Vent Mount. The Vent Mount must be braced against 3 level fins to be installed. Please ensure the back of the mount is not interacting with the vent housing.

Please refer to the Adhesive Dash/Console Surface Guide to ensure your surface is compatible with the Adhesive Dash/Console Mount.

Please refer to the EV Mounts surface guidelines to ensure your surface is compatible wit the EV Mounts.

Wireless Charging Heads purchased before July 2022 not compatible.

1 x Your Chosen Quad Lock® Case

• 1 x Quad Lock® Heavy Duty Suction Mount

• 1 x Quad Lock® Cup Holder Mount
• 1 x Quad Lock 360™ Top Cap

• 1 x Quad Lock® Vent Car Mount
• 1 x Quad Lock 360™ Top Cap

• 1 x Quad Lock® Adhesive Dash/Console Car Mount
• 1 x Quad Lock 360™ Top Cap
• 1 x Spare 3M VHB Adhesive Pad
• 1 x Alcohol wipe

• 1 x MAG Head
• 1 x Quad Lock MAG™ Head
• 1 x 3mm Hex (Allen) key in black zinc
• 1 x M5 x 16mm Countersunk head hex socket screw in black
• 1 x Dual Pivot Arm Medium (75mm)
• 1 x M6 x 14mm Flat head hex screw in black
• 1 x M6 x 14mm Thumb screw (to replace hex screw)
• 1 x M5 x 35mm Countersunk head hex socket screw
• 1 x 3mm Hex Key
• 1 x Flexible Adhesive Base
• 1 x 10mm Spacers
• 1 x M5x30 screw
• 1 x M5x45 screw
• 1 x Isopropyl Alcohol Wipe

• 1 x MAG Wireless Charging Head
• 1 x Quad Lock MAG™ Wireless Charging Head
• 1 x 3mm Hex (Allen) key in black zinc finish
• 1 x M5 x 20mm Countersunk Head Hex Socket Screw - Black
• 1 x 1.5M USB-C to USB-A cable
• 1 x Dual Pivot Arm Medium (75mm)
• 1 x M6 x 14mm Flat head hex screw in black
• 1 x M6 x 14mm Thumb screw (to replace hex screw)
• 1 x M5 x 35mm Countersunk head hex socket screw
• 1 x 3mm Hex Key
• 1 x Flexible Adhesive Base
• 1 x 10mm Spacers
• 1 x M5x30 screw
• 1 x M5x45 screw
• 1 x Isopropyl Alcohol Wipe

Optional Add-Ons:

• 1 x Quad Lock MAG™ Wireless Charging Head
• 1 x 3mm Hex (Allen) key in black zinc finish
• 1 x M5 x 20mm Countersunk Head Hex Socket Screw - Black
• 1 x 1.5M USB-C to USB-A cable

• 1 x Quad Lock® Wireless Charging Head
• 1 x 1.5M USB-C to USB-A Cable
• 1 x 3mm hex (Allen) key in black finish
• 1 x M5 x 20mm Countersunk head hex socket screw in black

• 1 x Quad Lock MAG™ Head
• 1 x 3mm Hex (Allen) key in black zinc
• 1 x M5 x 16mm Countersunk head hex socket screw in black

• 1 x Quad Lock MAG™ Head
• 1 x 3mm Hex (Allen) key in black zinc
• 1 x M5 x 16mm Countersunk head hex socket screw in black

• Secure Quad Lock® interface
• MAG Ring with strong-hold magnets pre-installed
• Composite construction (TPU / NYLON / PC)
• Protective lining
• Impact absorbing shell
• Compatible with wireless charging¹
• Compatible with Quad Lock® Twist, Lock Mounts and Heads, and Accessories
• Compatible with Quad Lock MAG™ Mounts and Heads, and Accessories
• Weight: 59 - 84g (2.08 - 2.96 oz)

tech specs

• Secure Quad Lock® interface
• Composite construction (TPU / PC)
• Microfibre lining (excluding the iPhone 5/5s/SE 1st Gen cases)
• Impact absorbing shell
• Compatible with wireless charging¹
• Compatible with Quad Lock® Twist, Lock Mounts, Heads, and Accessories

case specs drawing

• Adjustable grip-lock mechanism activated by turning the top knob
• Fits cup holders 70-100mm (2.8-3.9 inches) diameter
• Flexible 175mm (6.9 inches) gooseneck arm for optimal viewing
• Compatible with all Quad Lock® Cases and Universal Adaptors
• Compatible with Quad Lock® Wireless Charging Head
• Compatible with all Quad Lock MAG™ Heads

Cup Holder Mount Dimensions

• Glass filled nylon
• TPU knurled locking nuts
• Steel vent hook
• Compatible with all Quad Lock® Cases and Universal Adaptors
• Compatible with Quad Lock® Wireless Charging Head
• Compatible with all Quad Lock MAG™ Heads

vent tech specs

• All parts main construction: Tough, glass-filled nylon
• MAG Head: Minimal-look design with black zinc-coated stainless steel face screw
• Pivot arm: Preloaded tension keeps the arm assembled when adjusting
• Cable management: In-arm grooves keep cables tidy and out of the way
• Medium pivot arm: 75mm pivot-to-pivot, 22mm balls
• Flexible adhesive base: 60mm × 60mm × 18.3mm (H)
• Adhesive tabs: 28mm wide with two grooves, designed to bend or trim to fit your screen
• Adhesive: 3M™ for a strong, lasting hold

MAG-WCH dimensions

Dual Pivot Arm Dimensions

lexible Adhesive Base Dimensions

• All parts main construction: Tough, glass-filled nylon
• MAG Wireless Charging Head: Minimal-look design with black zinc-coated stainless steel face screw. 1.5m cable included
• Pivot arm: Preloaded tension keeps the arm assembled when adjusting
• Cable management: In-arm grooves keep cables tidy and out of the way
• Medium pivot arm: 75mm pivot-to-pivot, 22mm balls
• Flexible adhesive base: 60mm × 60mm × 18.3mm (H)
• Adhesive tabs: 28mm wide with two grooves, designed to bend or trim to fit your screen
• Adhesive: 3M™ for a strong, lasting hold

MAG-WCH dimensions

Du

Flexible Adhesive Base Dimensions

• Glass filled nylon housing
• Black zinc coated stainless steel screw
• 2mm thick Neodymium 52H nickel plated magnets
• Compatible with Quad Lock MAG™ Cases and Quad Lock MAG™ Universal Adaptor

MAG head specs

• Glass filled nylon housing
• Black zinc coated stainless steel screw
• 2mm thick Neodymium 52H nickel plated magnets
• Compatible with Quad Lock MAG™ Cases and Quad Lock MAG™ Universal Adaptor

MAG head specs